A Novel Fluorescent Probe for ATP Detection Based on Synergetic Effect of Aggregation-induced Emission and Counterion Displacement

In this work,a fluorescent probe(TPEBe-I)was developed for adenosine triphosphate(ATP)detection based on the synergetic effect of aggregation-induced emission and counterion displacement.TPEBe-I gave weak emission in aqueous solution due to the heavy-atom effect of counter iodide ion.However,upon the addition of ATP,the new aggregate complex(TPEBe-ATP)was formed between the cationic unit of TPEBe-I and ATP through electrostatic interactions,which not only restricted the intramolecular motion of luminogen but also eliminated the quenching effect of iodide ion.As a result,the fluorescent light-up detection for ATP was successfully achieved.Moreover,TPEBe-I exhibited high selectivity towards ATP and showed a wide linear detection region towards the logarithm of ATP concentration(5—600μmol/L)with a detection limit of 1.0μmol/L,enabling TPEBe-I as a promising probe for ATP quantitative analysis.     

静态顶空/气相色谱-质谱法同时测定化妆品中22种有毒挥发性有机溶剂残留

以2015版《化妆品安全技术规范》中规定的常见禁用及限用有毒挥发性有机溶剂为研究对象,建立了静态顶空/气相色谱-质谱法(SHS/GC-MS)同时测定化妆品中22种有毒挥发性有机溶剂(VOC)(二氯甲烷、顺式-1,2-二氯乙烯、反式-1,2-二氯乙烯、2-氯-1,3-丁二烯、三氯甲烷、1,2-二氯乙烷、苯、四氯化碳、三氯乙烯、甲苯、四氯乙烯、氯苯、乙苯、三溴甲烷、间二甲苯、对二甲苯、苯乙烯、邻二甲苯、异丙苯、1,4-二氯苯、1,2-二氯苯、六氯丁二烯)残留的检测方法。试样在80℃下30 min静态顶空,经DB-1柱分离后,采用选择离子监测模式(SIM)进行定性定量分析。优化了顶空、色谱和质谱参数,结果表明:22种VOC在0.5~50 ng/m L浓度范围内均呈良好的线性关系,相关系数均大于0.99,在1.0,2.0,5.0 ng/m L 3个浓度加标水平下的平均回收率为80.3%~102.7%,相对标准偏差(RSD,n=6)为6.4%~9.9%,检出限为0.2~5.0 ng/g。结果表明,该方法简便、灵敏、准确,具有良好的重现性和稳定性,适合于化妆品中22种VOC残留的筛查和确证检测。     

亲水作用色谱在糖类化合物分析中的应用

糖类化合物的结构和组成分析对于探究糖的结构与功能的关系具有重要作用。亲水作用色谱(HILIC)对糖类等极性化合物具有良好的分离效果。该文介绍了适合糖类分析的常用HILIC柱固定相及其分离机制,论述了强洗脱溶剂比例、流动相p H值、缓冲盐浓度和色谱柱温度对HILIC分离效果的影响,并举例说明了HILIC法在单糖组成、糖胺聚糖二糖组成、寡糖聚合度、糖苷、糖脂、糖醇以及N-/O-糖链分析中的应用。     

紫外光谱法结合化学计量学用于环境水样中2,4,6-三硝基甲苯及其分解物的同时测定

结合紫外吸收和偏最小二乘法建立了环境水样中2,4,6-三硝基甲苯及其分解物的分析方法,在不经过任何预先分离的情况下,实现了环境水样中2,4,6-三硝基甲苯(TNT)及其分解物2,4-二硝基甲苯(2,4-DNT)和2,6-二硝基甲苯(2,6-DNT)的快速准确测定.采用正交试验设计(OAD)配制了25个训练集样本和15个独立预测集样本,采用变量种群分析(VCPA)方法挑选特征变量以提高偏最小二乘法(PLS)模型的预测效果,预测集中每个物质的相关系数R2均达到0.99.将最优的VCPA模型用于真实水样中TNT以及DNT的检测,并采用HPLC方法进行了验证.实验结果显示,VCPA模型的回收率与HPLC法相近.紫外光谱法结合化学计量学方法可作为环境体系中多成分同时测定的一种简便、快速、有效的方法.     

Foam/Film Alternating Multilayer Structure with High Toughness and Low Thermal Conductivity Prepared via Microlayer Coextrusion

Multilayer membranes prepared via microlayer coextrusion have attracted wide attention due to their unique properties and broad applications. In present study, the foam/film alternating multilayer sheets based on ethylene-vinyl acetate copolymer(EVA) and high-density polyethylene are successfully prepared via microlayer coextrusion. The cells in the sheets are single-cell-array along the foamed EVA layers with uniform cell size. In addition, the effects of layer number and foam relative thickness on morphology, mechanical properties, damping and heat insulation properties are investigated. The cell size decreases significantly with increasing layer number due to the enhanced confine effects. The tensile strength, elongation at break, and heat insulation also increase significantly. However, the mechanical damping properties change little in the observed frequency. Meanwhile, with higher relative thickness of EVA foam, the sheets have lower tensile strength and lower thermal conductivity, while the damping properties are enhanced in a specific frequency scope. The elongation at break of the optimized sample comes to 800% and the thermal conductivity decreases to 61 mW·m~(-1)·K~(-1), which shows high toughness and low thermal conductivity, indicating a possible method for preparing materials with high toughness and heat-insulating properties.     

富氮多孔有机聚合物催化制备α⁃氰基肉桂酸乙酯

α-氰基肉桂酸乙酯作为含多种官能团的缺电子烯烃, 是一种极具应用价值的有机合成反应底物, 主要通过催化Knoevenagel缩合反应获得. 本文以多聚甲醛和三聚氰胺为前驱体, 采用溶剂热法制备富氮多孔有机聚合物mPMF, 经K₂CO₃处理得到K₂CO₃-mPMF-X(X=1, 10, 50). 考察了mPMF在苯甲醛和氰乙酸乙酯Knoevenagel缩合反应中的催化性能, 通过mPMF与K₂CO₃-mPMF-X催化活性的比较, 探讨了碱性强弱对Knoevenagel缩合反应的影响, 并对催化反应机理进行了探索. 结果表明, 催化剂中丰富的氮物种为反应提供了碱性环境和大量的碱性活性位点, 催化剂碱性强弱的控制是催化合成α-氰基肉桂酸乙酯的关键因素. mPMF在甲醇溶剂中于60 ℃反应3 h后, 苯甲醛转化率为97%, 目标产物选择性在99.9%以上.     

FEEDBACK CONTROL OPTIMIZATION FOR SEISMICALLY EXCITED BUILDINGS

A feedback control optimization method of partially observable linear structures via stationary response is proposed and analyzed with linear building structures equipped with control devices and sensors. First, the partially observable control problem of the structure under horizontal ground acceleration excitation is converted into a completely observable control problem. Then the It6 stochastic differential equations of the system are derived based on the stochastic averaging method for quasi-integrable Hamiltonian systems and the stationary solution to the Fokker-Plank-Kolmogorov （FPK） equation associated with the It6 equations is obtained. The performance index in terms of the mean system energy and mean square control force is established and the optimal control force is obtained by minimizing the performance index. Finally, the numerical results for a three-story building structure model under E1 Centro, Hachinohe, Northridge and Kobe earthquake excitations are given to illustrate the application and the effectiveness of the proposed method.     

初弯曲纵横弯曲梁的等效载荷法及其应用

介绍一种求解初弯曲纵横弯曲梁的方法——等效载荷法,以及该方法在解决实际工程问题中的成功应用,为井下控制工具的研制和井眼轨道控制提供了理论依据．     

考虑密封的悬臂转子系统的裂纹故障分析

以双盘悬臂立式转子-轴承系统为研究对象，建立了系统运动微分方程，并用数值方法分析了在非线性密封力和非线性油膜力作用下的裂纹转子的动力学特性。分析表明，在一定深度裂纹下，转子系统响应随不同角频率比表现出复杂的非线性现象，出现了周期k运动、拟周期运动和混沌运动等多种运动形式。在一定角速度时，工作在远离临界角速度区的转子系统对裂纹非常敏感，而工作在近临界角速度区的转子系统对裂纹不是特别敏感，但是裂纹对它的运动状态影响较大。该研究结果为该类转子-轴承系统的安全运行与故障诊断提供了一定的理论参考。     

改进的信道稀疏度检测正交多载波多普勒估计方法

针对正交频分复用水声移动通信中频域变采样技术联合信道稀疏度检测的多普勒估计算法在冰水混合区复杂信道环境下多普勒估计效果欠佳且计算量大的问题,提出了一种改进的多普勒估计算法。采用时域重采样技术对信号进行不同压缩因子的补偿,避免了频域变采样技术中的高阶快速傅里叶变换运算,从而降低了算法复杂度。利用梳状导频位置向量结合时域变采样技术更准确提取的导频子载波,进而获得更加精确的信道估计和信道稀疏度检测结果,提高了多普勒估计精度。仿真结果和冰下试验结果表明,与原始算法相比,改进的方法在冰水混合水域复杂多径时变信道环境下可以有效实现对信号多普勒畸变的跟踪并且计算量显著下降,能够保障正交频分复用水声移动实时通信。